Item Description
resin infusion(syringe) vacuum pump for resin vacuum infusion pump
Merchandise Description
|
Specific Perform |
|
|
Keep-Vein-Open up (KVO): |
Right after finishing predetermined infusion volume, to avert the formation of thrombus, carry on infusion with preset bare minimum rate 1ml/h or 3ml/h (setted). |
|
Power Provide Switching Function: |
When the AC electrical power offer is off, it will immediately change to inside battery energy offer and prompt at the very same time. When AC is switched on, it is immediately converted back again to AC provide. |
|
Repeat Alarm Purpose: |
Following the operator presses the “” important, if the purpose leading to the alarm has be untreated for about 2 minutes, the alarm will audio again to notify the operator to solve the difficulty. |
|
Data Memory Operate: |
Conserve the final setting of sound quantity level, manufacturer and occlusion stress amount, to get ready for the up coming use. The longest memory time is 5 years. |
|
Light-weight: |
For convenience, when installing or removing IV line at night or in darkness, light-weight will automatically change on right after the door is open up. The gentle is an LED gentle source (white). |
|
Battery Protection Alarm: |
In buy to defend the battery and guarantee infusion security, there are distinct levels of acousto-optic prompts when the electric quantity of the battery is modifying from close to depletion to virtually depleted. |
|
Large Circulation Security Verify: |
In buy to make sure infusion protection, when the flow fee is higher than 300ml/h (or equal), the system will prompt user to confirm once more, and will not carry out infusion before affirmation. |
|
Bubble Alarm: |
A continuously big quantity of bubbles going into the human physique can kind the air embolus, and it is existence-threatening. So when bubble length is about 3mm (10.6ul) or accumulated bubble duration is about 3mm (ten.6ul) is detected, will bring about acoustic-optic alarm. |
|
Drip Sensor Slope: |
In d/min manner, when there are issues such as tube slope, liquid overflow and misplaced/moved sensor, there will be an alarm. |
Comprehensive Photographs
Business Profile
FAQ
-
How to get your products ?Do you have distributor in our place?
You can buy the products from our business immediately.Typically the procedure is:Indication the speak to ,payment byT/T, speak to the shipping firm to supply the goods to your place.
-
What is the guarantee?
The free guarantee is 1 calendar year from the working day of Commissioning experienced.
-
Can we visit your nation ?
Of course,we will prepare for every little thing in progress if it is required .Normally,it is need that customers need to have develop agency relationship or company connection with our organization.
-
How lengthy is the validity of quotation?
Typically,our price tag is legitimate within 1 thirty day period from the date of quotation .The cost will be adjusted appropriately in accordance to the price tag fluctuation of raw material and adjustments in marketplace .
-
Do you have the CE certification ?
Indeed, most of our items have the CE certification.
|
US $100-300 / Piece | |
1 Piece (Min. Order) |
###
| Certification: | CE, FDA, EEC, ISO13485 |
|---|---|
| Scale: | Medium |
| Type: | Infusion Pump |
| Infusion Range: | 0.1ml/H~9999.9ml,Original Value Is 0.1ml |
| Built-in Batteries: | DC 12V 1800mAh,Ni-MH,Rechargeable |
| Weight: | 2.15kg |
###
| Samples: |
US$ 300/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
|
Special Function |
|
|
Keep-Vein-Open (KVO): |
After finishing predetermined infusion volume, to prevent the formation of thrombus, continue infusion with preset minimum rate 1ml/h or 3ml/h (setted). |
|
Power Supply Switching Function: |
When the AC power supply is off, it will automatically switch to internal battery power supply and prompt at the same time. When AC is switched on, it is automatically converted back to AC supply. |
|
Repeat Alarm Function: |
After the operator presses the "" key, if the reason causing the alarm has be untreated for about 2 minutes, the alarm will sound again to alert the operator to solve the problem. |
|
Data Memory Function: |
Save the last setting of sound volume level, brand and occlusion pressure level, to prepare for the next use. The longest memory time is 5 years. |
|
Light: |
For convenience, when installing or removing IV line at night or in darkness, light will automatically turn on after the door is open. The light is an LED light source (white). |
|
Battery Protection Alarm: |
In order to protect the battery and ensure infusion safety, there are different levels of acousto-optic prompts when the electric quantity of the battery is changing from close to depletion to almost depleted. |
|
High Flow Safety Confirm: |
In order to ensure infusion safety, when the flow rate is greater than 300ml/h (or equivalent), the device will prompt user to confirm again, and will not carry out infusion before confirmation. |
|
Bubble Alarm: |
A continuously large number of bubbles going into the human body can form the air embolus, and it is life-threatening. So when bubble length is about 3mm (10.6ul) or accumulated bubble length is about 3mm (10.6ul) is detected, will trigger acoustic-optic alarm. |
|
Drip Sensor Slope: |
In d/min mode, when there are problems such as tube slope, liquid overflow and misplaced/moved sensor, there will be an alarm. |
|
US $100-300 / Piece | |
1 Piece (Min. Order) |
###
| Certification: | CE, FDA, EEC, ISO13485 |
|---|---|
| Scale: | Medium |
| Type: | Infusion Pump |
| Infusion Range: | 0.1ml/H~9999.9ml,Original Value Is 0.1ml |
| Built-in Batteries: | DC 12V 1800mAh,Ni-MH,Rechargeable |
| Weight: | 2.15kg |
###
| Samples: |
US$ 300/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
|
Special Function |
|
|
Keep-Vein-Open (KVO): |
After finishing predetermined infusion volume, to prevent the formation of thrombus, continue infusion with preset minimum rate 1ml/h or 3ml/h (setted). |
|
Power Supply Switching Function: |
When the AC power supply is off, it will automatically switch to internal battery power supply and prompt at the same time. When AC is switched on, it is automatically converted back to AC supply. |
|
Repeat Alarm Function: |
After the operator presses the "" key, if the reason causing the alarm has be untreated for about 2 minutes, the alarm will sound again to alert the operator to solve the problem. |
|
Data Memory Function: |
Save the last setting of sound volume level, brand and occlusion pressure level, to prepare for the next use. The longest memory time is 5 years. |
|
Light: |
For convenience, when installing or removing IV line at night or in darkness, light will automatically turn on after the door is open. The light is an LED light source (white). |
|
Battery Protection Alarm: |
In order to protect the battery and ensure infusion safety, there are different levels of acousto-optic prompts when the electric quantity of the battery is changing from close to depletion to almost depleted. |
|
High Flow Safety Confirm: |
In order to ensure infusion safety, when the flow rate is greater than 300ml/h (or equivalent), the device will prompt user to confirm again, and will not carry out infusion before confirmation. |
|
Bubble Alarm: |
A continuously large number of bubbles going into the human body can form the air embolus, and it is life-threatening. So when bubble length is about 3mm (10.6ul) or accumulated bubble length is about 3mm (10.6ul) is detected, will trigger acoustic-optic alarm. |
|
Drip Sensor Slope: |
In d/min mode, when there are problems such as tube slope, liquid overflow and misplaced/moved sensor, there will be an alarm. |
How to Assemble a Pulley System
A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
Simple pulley
The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the two wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The two pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to one end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use two or more wheels to transmit force. Compound pulleys have two or more wheels and can lift heavier objects. Dim is POLE2.
tapered pulley
It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across four steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley pulley system
A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the two wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope four times reduces the force required to lift one foot. Likewise, if the pulley system had four pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is three times the length of the rope, it will be more than three times the required length.
editor by czh 2022-11-30